The following is a breakdown of the different tools I offer and an indept discription of each one and how they work.
Because there is no real hand tools for reloading .410 and .28 gage shotgun shells.... Paco is now manufacturing them from the finest and strongest brass stock available. These tools will last a lifetime of use.
They come as a set for the 410 and 28 gage, which includes the primer removal rod and primer removal disk, the repriming rod, and the reloading die. There are three different sets for .410 shotgun hulls, the 3 inch hull set and the popular 2 ½ inch hull set. Or the Combo- Set with both the three and 2 ½ dies.
Also there is a handy small tool (HRT), sold separately for reforming fired commercial shells for longer use. The commercial manufacturers of shotgun shells use a star crimp which is very difficult on the shotgun hulls. This little tool gives some life back to the fired commercial hulls.
The ATS system is simple but deadly when applied to 22 rimfire ammunition. Paco has worked out a way to cut a flat nose on the bullet tip without files and time consuming effort. With this system even low velocity and sub-velocity 22 rimfire ammo will expand with deadly results on small game.
He has designed clippers that quickly remove the bullet nose clean and flat. No files or long hours spent cutting bullet noses. 50 rounds can be done in three minutes ..while watching T.V. The basic set includes tool bodies for 22 mag rimfire, and three different depth tools for the 22 rimfire. Also the 22 mag RF tool body can be used on the 17 Rimfire Mag. The set can be carried to the range or in the hunting field.
With extra tool bodies also available for the 22 rimfire short and a very special tool body for the famous Aguila SSS 22 rimfire. This ATS system can cover all your rimfire needs for hunting. The set comes in a very strong storage case, that is small enough to carry right to the range.
For years the 22 rimfire bench rest shooters have measured the rims of their ammo... separating them into groups. Paco took a box of PERFECTION 22 rimfire ammo and measured the rims. He was surprised to find three different sizes. When he fired them in groups... his target showed the truth, his groups were 22% smaller than when the rim sizes were mixed.... Which explains why sometimes we get a great group and a ho-hum group from the same box.
Paco didn’t like the high cost of advertised devices to measure rims so he produces his own at a reasonable cost... And it really helps those that want pristine accuracy....
This is the time-proven Acu’rzr tool. It not only accurizes rimfire 22s... but with the three reforming rods it also make the bullets absolutely deadly.
THE ORIGINAL #3 TOOL HAS TWO CHAMBERS ONE ON EACH END AND CAN BE CUT FOR THE PRIMARY FIREARM IF IT HAS A EURO OR TARGET BORE, THEY NORMALLY COMES IN TWO CHAMBER SIZES .223 AND .224...WHICH COVERS 99% OR THE REST OF 22 BORES. THE BULLETS IN THE PIC SHOW THE NOSE SHAPES GIVEN BY THE THREE RODS THAT COME WITH EVERY TOOL BODY. ALL OF THE ACU’RZR TOOLS MAKE THOSE THREE SHAPES. The Cup Nose for clean cuts in paper and small game, Nasti-Nose a hollow pointer that makes the commercial ammo really expand...and the Scorp’n that gives expansion but also deeper penetration....
AT THE RIGHT IS THE PATENT PENDING MAXI 3 AND 4 ACU’RZRs. FOR THOSE WHO WANT FAST PRODUCTION YET MAINTAIN ACCURACY.... FORMING THREE OR FOUR ROUNDS AT A TIME.
THE PHASE FOUR (P4) ACU’RZR IS FOR FOLKS WHO HAVE A NUMBER OF 22rf FIREARMS. THE TOOL BODY GIVES BULLET DIAMETERS OF .222 FOR TARGET AUTOS AND TIGHT BORES, THROUGH .223, .224, FOR STANDARD BORES AND .225 FOR SLOPPY CHAMBERS LIKE THERE ARE ON MOST REVOLVERS....
THE MAXI PRO 4 AND MAXI PRO 3 ARE HIGH PRODUCTION TOOLS AND
CAN BE CHAMBERED IN ANY TWO SIZES. NORMALLY THEY ARE .223 AND
.224 FOR 99% OF AMERICAN MADE FIREARMS. BUT CAN BE CUSTOM CHAMBERED AT THE CUSTOMER’S REQUEST. REFORMING THREE OR FOUR BULLETS AT A TIME MAKES A LOT OF ACCURATE AMMO QUICKLY.
ALL TOOLS AND THE THREE REFORMING RODS, COME PACKAGED
IN A STRONG BLUE BOX WITH INSTRUCTIONS....
A LOT HAS BEEN SAID ABOUT THE PATENT PENDING ACU’RZR SYSTEM, BUT WHAT CAN’T BE DISCOUNTED IS THE INCREASED ACCURACY OF THE ACU’RZRed 22 RIMFIRE AMMO IT PRODUCES FROM EVEN INEXPENSIVE AMMO.... ALONG WITH THE DEADLY HUNTING ABILITY IT GIVES INEXPENSIVE 22rf AMMO.
The P4 is designed to give the shooter who has many 22rf firearms the ability to change the diameters of the bullets from .222 through .225 to find the best accuracy for each firearm.
Paco’s reloading shotgun dies don’t give a debilitating star crimp that causes cracks after one or two firings.... He has developed a patent pending system in the reloading dies that give an excellent crimp but doesn’t cause damage to the hull, like the commercial hull crimps cause. The whole reloading system for either of the four, the .410/2 ½ inch set, the .410/3 inch set, the Combo Set and the 28 gage shells, all come packed in a handy and very strong storage box.
The 28 gage set is the same design and tools as the .410 sets, except it is on 7/8ths to one inch thick stock brass, because of the O.D. size of the 28 gage hulls.
The hull reforming tool (HRT) is locked into a drill and then spun inside the hull to bring the hull mouth back to straight shape. It will rejuvenate a commercial star crimped hull to some degree.
Paco recommends trimming the commercial fired hull back passed the cracks caused by the star crimp, and then use the hull reforming tool on the trimmed hull. Then when reloaded with Paco’s loading set and the Sav’Crimp crimping feature in the reloading die, hull life is extended. Paco starting with brand new BALLISTIC HULLS from MidwayUSA.com and has reloaded them more than 15 times. And they are still going strong....
This was once a Win/Super 2½ inch fired commercial hull; it has been trimmed of the mouth cracks and had the HRT tool run through it... now it has been fired 9 times and is still in excellent shape.....with no cracks forming.....